Nr 4 / 24
Modeling Tools for Further Reduction of Emissions from Fluidized Bed Combustors (Liekki 2 - 219)
Modeling Tools for Further Reduction of Emissions from Fluidized Bed Combustors
Datum: | 1.4.1997-31.12.1998 |
Kod: | 17715 |
Institution: | Åbo Akademi / Kemisk-tekniska fakulteten (KTF), Förbränningskemiska forskargruppen vid ÅA |
Adress: |
Lemminkäinengatan 14 - 18 B, FIN-20510 Åbo
Tel. +358-2-2154 681 Fax +358-2-2154 780 E-post pkilpine@abo.fi |
Projektledare: |
TkD Mikko Hupa, professor
(1.4.1997-31.12.1998) TkD Pia Kilpinen, (1.4.1997-31.12.1998) |
Forskare: |
TkL Anders Brink (1.4.1997-31.12.1998) TkD Christian Mueller (1.4.1997-31.12.1998) TkL Sirpa Kallio (1.4.1997-31.12.1998) DI Tommy Nordström (1.4.1997-31.12.1998) |
Typ av forskning: |
1 (0=Inom tjänst, 1=Beställd forskning, 2=Samarbetsforskning)
- utvecklingsarbete 100 % |
Årsverken: | Totalt: 140 månader |
Partner: | Ruhr Universität Bochum, Germany VTT Energy, Esbo, Finland |
Ämnesord: | förbränningsteknik, avfallsgaser, rökgaser, utsläpp, polttotekniikka, jätekaasut, savukaasut, päästöt, förbränning, förgasning, forskningsprogram, combustion, gasification, research programme, |
Svenskt abstrakt föreligger tyvärr inte.
The aim of the project is to assist in development of more efficient in-furnace methods for controlling gaseous emissions from energy conversion technologies based on combustion and/or gasification.The main emphasis is put on technologies such as fluidized bed combustion (CFBC, BFBC) and combined cycle processes (PFBC, IGCC).The project consists of two parts: a) detailed chemical kinetic elementary reaction modeling and b) prediction of nitrogen oxide emissions from practical combustors.The following topics have been studied 1997: a) Detailed kinetic modeling: · effect of HCl and nitrogen oxides on CO burn-out in freeboard conditions during waste combustion in FBC. · effect of pressure on the Thermal DeNOx process under PFBC conditions.
1.10.1996 / 17.6.1998